General Spares

Suits engines Wren 44 / 70 / 75 / Ssport / 100

Suits Wren 120/160 engine

Ceramic element - 6 volt operation - use in place of glow plug. Suits all engines with Fadec ECU AU 107K (part no:1165)

Suitable battery to starter, battery to glow plug. Multiplex type.

Consists of 2 leads. Multiplex lead with plug fitted to connect to starter motor. Lead with matching Multiplex connector & in-line push button switch

Used for all Kero Start motors.

Replacement element for all Kero Burner assemblies.

Anodised Green

Anodised Green

Anodised Green

Only compatible with part no 1166

Only compatible with part no 1165

Used for Wren 120 -160 with ProJet ECU

Used for Wren 120-160 with Fadec ECU

Used with new 2 piece mount. Also used on 44 Heli and Turbo Prop

Used with old style mount

Used on 44 thru 100 series Wren motors, magnetic

Suits fuel or gas. Valve only. May need Festo part no 1100 x 2 for all engines except Wren 160. Wren 160 may need Festo part 1100 x 1 and Barb part 1147 x 1

M3 male threaded, suits 3mm & 4mm tube. Used on both propane and fuel solenoids.

Not yet compatible with part no 1165 . Used with Fadec type ECU

Push-in 3mm male to M3 male thread

Push-in 3mm, female "Y"

Push-in 3mm, female rotating ''T'', to M3 male thread

Push-in 3mm, female "T"

Push-in, 3mm female, to 3mm female straight

Push-in 3mm female rotating 90 degree elbow, to M3 male thread. Requires 2 x part no 1108 (push in reducer)

Push-in 3mm female to 4mm female adaptor

4mm male to 3mm push-in. Suitable to convert part no 1111 shut off tap for 3mm piping

M5 male inlet, 3mm push-in outlet with position lock nut. Note: reverse flow in free flow -not regulated May also need part numbers 1117 & 1118

Female push-in 4mm

Used on all current Wren 44 motors using the Xicoy type Fadec, all 54 series, 70-75-100 motors. Includes stainless mount strap.

Used on all Wren 120 and 160 series motors. Includes stainless mount strap.

M3 female in & out 15 micron element (replaceable). Select screw in connectors as required - part no 1100 (male stud) or part no 1147 (barb)

Large in-line fuel filter for 4mm Tubing. We recommend that you locate the filter between the pump and valves.

Suitable for all Wren 44 Engines only. Equivalent to Flightworks 100 Pump.

With fitting for 3mm & 4mm pipe. For attaching to propane canister to control flow of gas

Fits 3mm tube. Self sealing quick release used for connecting to external propane supply - "off board gas" use with canister valve. Not For Fuel

With tee fitting for 3mm & 4mm pipe. Small propane gas canister for fitting on-board model. Holds enough for approx 5 starts.

1.9mm shaft. 7.2 V nominal 30,000 rpm with suppressor plate. No clutch. Suits turbines all Wren engines

Suits all Wren engines except Wren 44 engine

Suits Wren 44 engine only

Anodised green. Suits Wren 160/120 engine. Fixing diameter 111mm/4.4 inches Suitable for 280BB starter motor only.

Anodised green. Suits Wren 54 Mk 1/2/3/4, Wren 70/75, Supersport/100 engine. Fixing diameter 89mm/3.5inches Suitable for 280BB starter motor only.

Anodised green. Suits Wren 44 engine only. Fixing diameter 75mm/3 inches. Suitable for 280BB starter motor only.

Suitable for 280BB starter motor. Suits All engines but not Wren 44

Suitable for 280BB starter motor. Suits Wren 44 engine only.

0.15mm Single wall - suited to engines to 16kg thrust

0.15mm Single wall - suited to engines to 10kg thrust

0.15mm Single wall - suited to engines to 10kg thrust

0.1mm Single wall - suited to engines to 7kg thrust

0.1mm Single wall - suited to engines to 7kg thrust

Sold by the foot

Sold by the foot

Sold by the foot

Sold by the foot

3.15mm internal diameter, fuel and lubricant proof (kerosene and oil proof). $ 2.00 PER FOOT(USA ONLY) Soft and Pliable Normally used for fuel tank to fuel pump inlet connection. NOT SUITABLE FOR PRESSURE APPLICATIONS