General Spares
1800 Lipo
Suits engines Wren 44 / 70 / 75 / Ssport / 100
Part Number: 1154
£24.40
(£20.33 ex UK VAT)
(£20.33 ex UK VAT)
Wren Mini Power Plug
Ceramic element - 6 volt operation - use in place of glow plug. Suits all engines with Fadec ECU AU 107K (part no:1165)
Part Number: 1140
£40.00
(£33.33 ex UK VAT)
(£33.33 ex UK VAT)
Gold plated, plug & socket set (6 way)
Suitable battery to starter, battery to glow plug. Multiplex type.
Part Number: 1176
£3.00
(£2.50 ex UK VAT)
(£2.50 ex UK VAT)
Starter Lead for Manual On-Board Start
Consists of 2 leads. Multiplex lead with plug fitted to connect to starter motor. Lead with matching Multiplex connector & in-line push button switch
Part Number: 1177
£20.00
(£16.67 ex UK VAT)
(£16.67 ex UK VAT)
Wren Kero Burner System Kit
Complete set (+ propane line blank)
Suits engines with kero type ECU/HDT only.
Will be shipped with kero instruction manual
Part Number: 1164
£130.00
(£108.33 ex UK VAT)
(£108.33 ex UK VAT)
Hand controller
Used for ground running an engine without a transmitter/receiver. Connects directly to ECU and provides full engine starting and running control.
Instructions
Part Number:
£99.00
(£82.50 ex UK VAT)
(£82.50 ex UK VAT)
Kero Start Upgrade Kit (for all Wren engines)
The upgrade kit includes the latest FADEC ECU and data terminal, Wren ceramic igniter and full instruction manual. Please specify engine and fuel pump type when ordering.
Part Number:
£330.00
(£275.00 ex UK VAT)
(£275.00 ex UK VAT)
External Kero Burner Core
All Wren engines, except Jubilee 75 & Jubilee 80.
Replacement burner core for Wren kero system, simply screws in to existing plug boss. Comes complete with two"O" rings.
Part Number:
£90.00
(£75.00 ex UK VAT)
(£75.00 ex UK VAT)
Wren 54 Mk 1 - 4/Wren 70/75/SSport/100
Anodised Green
Please specify with or without thrust ring
Part Number: 1197
£30.00
(£25.00 ex UK VAT)
(£25.00 ex UK VAT)
Wren 100 Conversion Mount
Allows the Wren 100 to be fitted to models suited to a 120/160-sized engine mounting.
Part Number:
£26.00
(£21.67 ex UK VAT)
(£21.67 ex UK VAT)
Thermocouple:
Used for Wren 120 -160 with ProJet ECU
Part Number: 1171P
£29.00
(£24.17 ex UK VAT)
(£24.17 ex UK VAT)
Wren 160 Type
Used for Wren 120-160 with Fadec ECU
Part Number: 1171F
£29.00
(£24.17 ex UK VAT)
(£24.17 ex UK VAT)
Wren 44 tube version
Used with new 2 piece mount. Also used on 44 Heli and Turbo Prop
Part Number: 1173
£29.00
(£24.17 ex UK VAT)
(£24.17 ex UK VAT)
RPM Sensor
Used on 44 thru 100 series Wren motors, magnetic
Part Number: 1167
£32.60
(£27.17 ex UK VAT)
(£27.17 ex UK VAT)
Solenoid Valve
Suits fuel or gas. Valve only. May require screw-in connectors as required - part no 1100 (festo male stud) or part no 1147 (barb)
2 pin plug as standard, 3 pin shell provided
Part Number: 1149
£56.00
(£46.67 ex UK VAT)
(£46.67 ex UK VAT)
Barbs for Solenoid
M3 male threaded, suits 3mm & 4mm tube. Used on both propane and fuel solenoids.
Part Number: 1147
£4.00
(£3.33 ex UK VAT)
(£3.33 ex UK VAT)
ECU - UNPROGRAMMED
ONLY AVAILABLE DIRECT FROM MANUFACTURER WWW.XICOY.COM - see below for programming details. This ECU is only compatible wth HDT 1166
Part Number: 1165
£0.00
(£0.00 ex UK VAT)
(£0.00 ex UK VAT)
ECU PROGRAMMING - Wren engines only
Advise Xicoy to dispatch your ECU order to Wren UK & then immediately place an order with us for ECU programming. Once this is received we will contact you for your engine/fuel pump details & liaise with Xicoy.
Part Number: prgm
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
Mini Hand Data Terminal
Backlit display, small size, low current draw, can be permanently mounted in airframe to monitor engine’s functions. Weight: 25g Size:5x38x12.4mm
Compatible Xicoy ECU AU107K or plugged into RX servo channel to monitor battery & signal output
Part Number: MiniHDT
£58.00
(£48.33 ex UK VAT)
(£48.33 ex UK VAT)
Male Stud - Push In 3mm
Push-in 3mm male to M3 male thread
Part Number: 1100
£6.10
(£5.08 ex UK VAT)
(£5.08 ex UK VAT)
Female Stud - Push In 3mm
Push-in 3mm female to M3 female thread
Part Number: 1101
£4.75
(£3.96 ex UK VAT)
(£3.96 ex UK VAT)
Male Branch 'T' 3mm
Push-in 3mm, female rotating ''T'', to M3 male thread
Part Number: 1103
£10.30
(£8.58 ex UK VAT)
(£8.58 ex UK VAT)
Union Straight Connector 3mm
Push-in, 3mm female, to 3mm female straight
Part Number: 1105
£4.75
(£3.96 ex UK VAT)
(£3.96 ex UK VAT)
Rotatable 90 Degree Elbow 3mm
Push-in 3mm female rotating 90 degree elbow, to M3 male thread. Requires 2 x part no 1108 (push in reducer)
Part Number: 1106
£7.10
(£5.92 ex UK VAT)
(£5.92 ex UK VAT)
Bulkhead Connector 3mm
Push-in 3mm female to 3mm female bulkhead, externally threaded M8 with two twin nuts.
Part Number: 1107
£7.10
(£5.92 ex UK VAT)
(£5.92 ex UK VAT)
Reducer Push In 4mm to 3mm
Push-in 3mm female to 4mm female adaptor
Part Number: 1108
£5.00
(£4.17 ex UK VAT)
(£4.17 ex UK VAT)
Plug-in Reducer
4mm male to 3mm push-in. Suitable to convert part no 1111 shut off tap for 3mm piping
Part Number: 1109
£5.20
(£4.33 ex UK VAT)
(£4.33 ex UK VAT)
Adjustable Swivelling Gas Flow Control Valve - com
M5 male inlet, 3mm push-in outlet with position lock nut. Note: reverse flow in free flow -not regulated
May also need part numbers 1117 & 1118
Part Number: 1110
£28.80
(£24.00 ex UK VAT)
(£24.00 ex UK VAT)
Bulkhead Fitting & M5 Miniature Hose Nipple, 4mm
To be used with Flow Control Valve (part no 1110) if required - sold as set
Part Number: 1117 & 1118
£5.25
(£4.38 ex UK VAT)
(£4.38 ex UK VAT)
Mount for Fuel Shut Off Tap
**Shut Off Tap not included**
Part Number: 1120
£8.00
(£6.67 ex UK VAT)
(£6.67 ex UK VAT)
Hausl ZP30725F Pump
Suitable for Wren Engines - 54, 70, 75, SuperSport, 100
Equivalent to Flightworks 200 / Xicoy B180 / ZP28028 pumps. With barbed fittings for 4mm pipe on inlet and outlet.
Part Number: 1134
£120.00
(£100.00 ex UK VAT)
(£100.00 ex UK VAT)
Small Fuel Filter (in line)
M3 female in & out 15 micron element (replaceable). Select screw in connectors as required - part no 1100 (festo male stud) or part no 1147 (barb). For 3mm or 4mm tubing.
We recommend that you locate the filter between the pump and valves
Part Number: 1138
£13.20
(£11.00 ex UK VAT)
(£11.00 ex UK VAT)
Large Fuel Filter (in-line)
as for small fuel filter above but for 4mm tubing only - no barbs or festo connectors needed. We recommend that you locate the filter between the pump and valves
Part Number: 1139
£15.50
(£12.92 ex UK VAT)
(£12.92 ex UK VAT)
Hausl Magnetic Pump - ZP25M14
Suitable for all Wren 44 Engines only.
Equivalent to Flightworks 100 Pump.
Part Number: 1133
£120.00
(£100.00 ex UK VAT)
(£100.00 ex UK VAT)
Hausl Pump - ZP30020SF
Suitable for Wren 120 + 160 Engines.
Equivalent to Flightworks 400 Pump.
Part Number: 1135
£120.00
(£100.00 ex UK VAT)
(£100.00 ex UK VAT)
Hausl Pump Mount - ZP25M14F
Pump Mount for the Hausl fuel pump number above - for Wren 44 Turboprop / Helicopter / Gold Engines
***Pump not included***
Part Number: 1136
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
Fuel Pump Mount - Hausl 28028 + ZP30725 + ZP3002SF
2-piece mount to fit Hausl fuel pumps numbered for MW54/SS/70/75/Jubilee/100/120/160 engines. ***Pump not included***
Part Number: 1138
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
Gas Cannister Valve
With fitting for 3mm & 4mm pipe. For attaching to propane canister to control flow of gas
Part Number: 1143
£31.00
(£25.83 ex UK VAT)
(£25.83 ex UK VAT)
Quick Connector (Rectus Valve)
Fits 3mm tube. Self sealing quick release used for connecting to external propane supply - "off board gas" use with canister valve. Not For Fuel
Part Number: 1144
£26.50
(£22.08 ex UK VAT)
(£22.08 ex UK VAT)
On Board Gas Cannister
With tee fitting for 3mm & 4mm pipe. Small propane gas canister for fitting on-board model. Holds enough for approx 5 starts.
Part Number: 1145
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
FADEC Extension cable set
Full set of high-quality cable set to extend between the engine and ECU (starter/glow, RPM and thermocouple).
Standard length: 400mm (custom lengths available on request)
Compatible with FADEC ECU.
Part Number: 1175 FADext
£25.00
(£20.83 ex UK VAT)
(£20.83 ex UK VAT)
FADEC ECU to Starter/Glow lead
Leads for starter motor and glowplug power. For use with FADEC ECU only.
Part Number: 1175 FADSG
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
FADEC ECU Extension lead
30cm Extension between motor and ECU. These can be made to custom length. For use with FADEC ECU only.
Part Number: 1175 FADEX
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
FADEC ECU to Pump/Battery lead
Leads for fuel pump and battery. For use with FADEC ECU only.
Part Number: 1175 FADPB
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
ProJET ECU to Starter/Glow lead
Leads for starter motor and glowplug power. For use with ProJET ECU only.
Part Number: 1175 PJSG
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
ProJET ECU to Fuel Pump lead
Leads for fuel pump. For use with ProJET ECU only.
Part Number: 1175 PJFP
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
ProJET ECU to Battery lead
Leads for ECU battery. For use with ProJET ECU only.
Part Number: 1175 PJB
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
ProJET ECU Extension lead
30cm Extension between motor and ECU. These can be made to custom length. For use with ProJET ECU only.
Part Number: 1175 PJEX
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
Battery extension lead
30cm Extension between battery and ECU. These can be made to custom length. Fitted with Deans connectors.
Part Number:
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
FADEC ECU Extension lead for Bergen Helicopter
40cm Extension between motor and ECU. These are made to length specifically to fit the Bergen 44 helicopter engine. For use with FADEC ECU only.
Part Number: 1175 BFADEX
£16.00
(£13.33 ex UK VAT)
(£13.33 ex UK VAT)
280BB Ballraced Starting Motor
1.9mm shaft. 7.2 V nominal 30,000 rpm with suppressor plate. No clutch. Suits turbines all Wren engines
Part Number: 1155
£38.50
(£32.08 ex UK VAT)
(£32.08 ex UK VAT)
Large Bendix Clutch Assembly
Speed 280 motor. Large "Bendix" style clutch starter assembly, suitable for part no 1155 280BB motor. All Wren engines except Wren 44
Part Number: 1158
£35.00
(£29.17 ex UK VAT)
(£29.17 ex UK VAT)
Small Bendix Clutch Assembly
Speed 280 motor. Small "Bendix" style clutch starter assembly, suitable for part no 1155 280BB motor. Suits Wren 44 engine only
Part Number: 1159
£35.00
(£29.17 ex UK VAT)
(£29.17 ex UK VAT)
Starting Motor & Large Bendix Clutch Complete
Suits all Wren engines except Wren 44 engine
Part Number: 1156
£73.00
(£60.83 ex UK VAT)
(£60.83 ex UK VAT)
Starting Motor & Small Bendix Clutch Complete
Suits Wren 44 engine only
Part Number: 1157
£73.00
(£60.83 ex UK VAT)
(£60.83 ex UK VAT)
Large FOD Screen Starter Housing
Anodised green. Suits Wren 160/120 engine. Fixing diameter 111mm/4.4 inches Suitable for 280BB starter motor only.
Part Number: 1180
£135.00
(£112.50 ex UK VAT)
(£112.50 ex UK VAT)
Medium FOD Screen Starter Housing
OUT OF STOCK UNTIL MID APRIL - Anodised green. Suits Wren 54 Mk 1/2/3/4, Wren 70/75, Supersport/100 engine. Fixing diameter 89mm/3.5inches Suitable for 280BB starter motor only.
Part Number: 1181
£105.00
(£87.50 ex UK VAT)
(£87.50 ex UK VAT)
Small FOD Screen Starter Housing
Anodised green. Suits Wren 44 engine only. Fixing diameter 75mm/3 inches. Suitable for 280BB starter motor only.
Part Number: 1182
£85.00
(£70.83 ex UK VAT)
(£70.83 ex UK VAT)
Long Starter Cap (Black Delrin)
Suitable for 280BB starter motor. Suits All engines but not Wren 44
Part Number: 1170
£3.00
(£2.50 ex UK VAT)
(£2.50 ex UK VAT)
Short Starter Cap (Black Delrin)
Suitable for 280BB starter motor. Suits Wren 44 engine only.
Part Number: 1169
£3.00
(£2.50 ex UK VAT)
(£2.50 ex UK VAT)
Insulation Material (per metre)
610mm wide - 1.5mm thick - aluminium foil backed, ceramic fibre, heat resistant blanket. Can be attached by aluminium heat resistant duct tape.
Part Number: 1150
£18.00
(£15.00 ex UK VAT)
(£15.00 ex UK VAT)
Wren 160 620mm long
0.15mm Single wall - suited to engines to 16kg thrust
Part Number: 1194
£85.00
(£70.83 ex UK VAT)
(£70.83 ex UK VAT)
Ebbage Clip (sold in pairs)
Used to secure exhaust extensions - for helicopter & turboprop engines
Part Number: 1196
£10.00
(£8.33 ex UK VAT)
(£8.33 ex UK VAT)
Supersport/Jubilee/Wren 100 420mm long
0.15mm Single wall - suited to engines to 10kg thrust
Part Number: 1192
£75.00
(£62.50 ex UK VAT)
(£62.50 ex UK VAT)
Supersport/Jubilee/Wren 100 620mm long
0.15mm Single wall - suited to engines to 10kg thrust
Part Number: 1192
£85.00
(£70.83 ex UK VAT)
(£70.83 ex UK VAT)
Wren 44 420mm long
0.1mm Single wall - suited to engines to 5kg thrust
Part Number: 1190
£65.00
(£54.17 ex UK VAT)
(£54.17 ex UK VAT)
Wren 44 620mm long
0.1mm Single wall - suited to engines to 5kg thrust
Part Number: 1190
£75.00
(£62.50 ex UK VAT)
(£62.50 ex UK VAT)
Double wall for tailpipe
All of our tailpipes are available in a double walled variant. Adding this to your basket in addition to one of the above will change your tailpipe order a double walled type.
Part Number:
£50.00
(£41.67 ex UK VAT)
(£41.67 ex UK VAT)
Polyeurothane Fuel Tube 3mm (clear) per Metre
Part Number: 1115
£2.00
(£1.67 ex UK VAT)
(£1.67 ex UK VAT)
Tygon Tubing per 1/2 Mtr
3.15mm internal diameter, fuel and lubricant proof (kerosene and oil proof).
$ 3.25 PER FOOT(USA ONLY)
Soft and Pliable
Normally used for fuel tank to fuel pump inlet connection.
NOT SUITABLE FOR PRESSURE APPLICATIONS
Part Number: 1119
£3.10
(£2.58 ex UK VAT)
(£2.58 ex UK VAT)
Polyeurothane Fuel Tube 4mm (clear) per Metre
Part Number: 1116
£2.00
(£1.67 ex UK VAT)
(£1.67 ex UK VAT)
Polyeurothane Gas Tube 3mm (green) per Metre
Part Number: 1115
£2.00
(£1.67 ex UK VAT)
(£1.67 ex UK VAT)